Skip to main content

Differences between MC/MC-C and ME/ME-C engines

The electrohydraulic control mechanisms of the ME engine replace the following components of the conventional MC engine:
  • Chain drive for camshaft
  • Camshaft with fuel cams, exhaust cams and indicator cams
  • Fuel pump actuating gear, including roller guides and reversing mechanism
  • Conventional fuel pressure booster and VIT system
  • Exhaust valve actuating gear and roller guides
  • Engine driven starting air distributor
  • Electronic governor with actuator
  • Regulating shaft
  • Engine side control console
  • Mechanical cylinder lubricators.
The Engine Control System of the ME engine comprises:
  • Control units
  • Hydraulic power supply unit
  • Hydraulic cylinder units, including:
  • Electronically controlled fuel injection, and
  • Electronically controlled exhaust valve activation
  • Electronically controlled starting air valves
  • Electronically controlled auxiliary blowers
  • Integrated electronic governor functions
  • Tacho system
  • Electronically controlled Alpha lubricators

Comments

  1. Great job for publishing such a nice article. Your article isn’t only useful but it is additionally really informative. Thank you because you have been willing to share information with us.Hydraulic Clamping System Manufacturers

    ReplyDelete
  2. Such beautifully written. And the information provided is very useful. Thanks for sharing such an informative and interesting article. Check this out too water damage restoration philadelphia.Thanks!

    ReplyDelete
  3. This blog is really helpful to deliver updated affairs over internet which is really appraisable.
    Handover Inspection Brisbane

    ReplyDelete
  4. If you're looking for flooring that's both stylish and durable, you'll love the selection of flooring available at your local flooring store. From wood floors to laminate floors, you're sure to find the perfect flooring for your home. Flooring Near Me

    ReplyDelete
  5. I found one successful example of this truth through this blog. I am going to use such information now.
    kawasaki ninja

    ReplyDelete
  6. It is really a helpful blog to find some different source to add my knowledge.
    Mini excavator hire

    ReplyDelete
  7. I am happy after visited this site. I like all your posts. You were very nice Thanks for the information provided, they helped

    me a lot mecrack.net I hope you have more information Great blog.

    PicPick Professional Crack

    HitFilm Pro Crack

    MediaMonkey Gold Crack

    Emby Premiere Crack

    Power Data Recovery Crack

    ReplyDelete
  8. Amazing blog! I really like the way you explained such information about this post to us.
    And a blog is really helpful for us on this website.
    windows8ny.net

    TablePlus Crack Crack

    NCH MixPad Masters Edition Crack

    Driver Reviver Crack

    uTorrent Pro Crack

    Prezi Pro Crack

    ReplyDelete

Post a Comment

If you have any doubts.Please let me know

Popular posts from this blog

Why is a man hole door elliptical in shape?

Any opening in a pressure vessel is kept to a minimum and for a man entry an elliptical hole  is lesser in size than the corresponding circular hole. More over it is prime concern to have a  smoothed generous radius at the corners to eliminate stress concentration. Hence other  geometrical shapes like rectangle and square are ruled out.  To compensate for the loss of material in the shell due to opening, a doubler ring has to be  provided around the opening. The thickness of the ring depends on the axis length along the  dirrection in which the stresses are maximum and the thickness of the shell. It is important to  align the minor axis along the length of the vessel, as the stress in this direction is  maximum. Longitudinal stress: Pd/2t where P= pressure inside the vessel, d= diameter of the arc, t=  thickness of the shell plating  Circumferential stress: Pd/4t  More over a considerable material and weight saving is achieved as minor is along the  direction of maximum stress.

Shell Expansion Plan

It is a two dimensional drawing of a three dimensional surface of the ship’s hull form. This plan is very useful for the following information:It is used for marking the location of a hull Damage on this plan by identifying the strake number , letter and frame number so that the exact location of the damage and also suggested repairs are marked in a localised copy. The shell expansion can be used for finding areas of painting surfaces such as topside, boot topping and bottom areas by applying Simpsons rules directly.  In the shell expansion the vertical scale used is different from the horizontal scale and a suitable adjustment has to be made when calculating areas. This becomes useful in solving disputes concerning areas of preparation and painting. It gives information on the thickness of the original strake which is indicated by the number in the circle shown in the strake.  The quality of steel used is also shown by letters A,B,D E and AH, BH,DH, EH.