Skip to main content

How to remove broken stud ?

  • Clean the surface before trying to remove the broken stud.
  • Flatten the broken end.
  • Punch with centering punch at the centre of broken stud.
  • Use a small drill to make a hole on the broken stud , ensure no damage to threads.
  • Again drill a little bigger hole and ensure no damage to threads
  • Use the stud extractor to remove the broken stud by rotating in anti clockwise direction
  • Note-- stud extractor has a left handed thread. We can also remive the broken stud by using WD 40 and turning the stud with the help of screw driver or chiesel

Comments

  1. cruxweldApril 6, 2022 at 2:56 AM

    You are providing good knowledge. It is really helpful and factual to increase one's knowledge. Well you should check this out too stud welding machine. And again please continue sharing your data it's really helpful. Thank you.

    ReplyDelete
  2. WETBLASTINGJanuary 24, 2023 at 3:25 PM

    I found decent information in your article. I am impressed with how nicely you described this subject, Vaporblasting It is a gainful article for us. Thanks for share it.

    ReplyDelete
  3. reviewsconsultsFebruary 23, 2023 at 1:07 PM

    This post is so useful and valuable to increase our knowledge. I am happy that you have shared great info with us. Grateful to you for sharing an article like Ultimate Guide On Style And Personality this.

    ReplyDelete
  4. glassaluminiumfencingFebruary 23, 2023 at 1:58 PM

    You are providing good knowledge. It is really helpful and factual information for us and everyone to increase knowledge. about gold coast pool fencing .Continue sharing your data. Thank you.

    ReplyDelete
  5. AnonymousNovember 17, 2023 at 12:34 AM

    Your tips on how to choose the right wall planter for your space were so helpful. I feel much more confident in making a decision now.

    ReplyDelete

Post a Comment

If you have any doubts.Please let me know

Popular posts from this blog

Manganese bronze is not typically used as a propeller material .Why

1. High cost: Manganese bronze is a costly alloy, making it less economical for large propellers. 2. Low strength-to-weight ratio: Compared to other propeller materials like nickel-aluminum bronze or stainless steel, manganese bronze has a lower strength-to-weight ratio. 3. Susceptible to corrosion: Manganese bronze can corrode in seawater, especially when exposed to high velocities and turbulence. 4. Poor cavitation resistance: Manganese bronze is more prone to cavitation damage than other materials. 5. Difficult to cast and machine: Manganese bronze is challenging to cast and machine, making it less desirable for complex propeller geometries. 6. Limited weldability: Manganese bronze has poor weldability, making repairs and modifications difficult. Nickel-aluminum bronze or stainless steel are commonly used for propellers due to their: - High strength and durability - Excellent corrosion resistance - Good cavitation resistance - Ease of casting and machining - Weldability
88 comments
Read more

Main engine interlocks

Interlocks are provided so that the engine can be started or reversed only when certain conditions have been fulfilled. When there is a remote control of engines, it is essential to have interlocks. This reduces the possibility of engine damage and any hazards to the operating personnel. Turning gear Interlock . This device prevents the engine from being started if the Turning gear is engaged. Running Direction Interlock . This prevents the fuel from being supplied if the running direction of the engine does not match the Telegraph. Starting Air Distributor in end position . This prevents starting from taking place if the shifting of the Distributor has not been completed. Main Lube. oil pressure, Piston cooling pressure, Jacket water pressure, and important parameters must be above the required minimum. Auxiliary Blower Interlock . The Auxiliary Blower is provided in case of Constant pressure turbo charging. Air Spring pressure Interlock . In case of the present generation...
8 comments
Read more

Differences between MC/MC-C and ME/ME-C engines

The electrohydraulic control mechanisms of the ME engine replace the following components of the conventional MC engine: Chain drive for camshaft Camshaft with fuel cams, exhaust cams and indicator cams Fuel pump actuating gear, including roller guides and reversing mechanism Conventional fuel pressure booster and VIT system Exhaust valve actuating gear and roller guides Engine driven starting air distributor Electronic governor with actuator Regulating shaft Engine side control console Mechanical cylinder lubricators. The Engine Control System of the ME engine comprises: Control units Hydraulic power supply unit Hydraulic cylinder units, including: Electronically controlled fuel injection, and Electronically controlled exhaust valve activation Electronically controlled starting air valves Electronically controlled auxiliary blowers Integrated electronic governor functions Tacho system Electronically controlled Alpha lubricators
15 comments
Read more