Skip to main content

Ship security alarm system (SSAS)

International Maritime Organization (IMO) legislation states that the ship’s security alert system shall:
  • Be initiated by pressing a dedicated SSAS button and transmitting a ship-to-shore security alert to a competent authority designated by the administration, which may include the company, identifying the ship, its location and indicating that the security of the ships is under threat or has been compromised
  • Not send the ship security alert to any other ships
  • Not raise any alarm on board the ship, and
  • Continue the ship security alert until deactivated and/or reset.
SSAS is not part of the GMDSS communication requirements but its equipment can be used to support the system.
Ship security alerts can be sent using Inmarsat C and Mini C,
SSAS regulations is that security alerts are required to be routed only to the Company Security Officer and the Flag.
SSAS resetting after take over with change vessel particulars email address and flag contact address
Labels:

Comments

  1. alertlockMarch 5, 2021 at 2:20 AM

    This comment has been removed by the author.

    ReplyDelete
  2. alertlockMarch 5, 2021 at 2:21 AM

    You have shared a nice article here about this topic. Your article is very informative and nicely describes about heaters. Thanks for sharing this article here.Alarm system San Antonio

    ReplyDelete
  3. Locksmith On Duty LLCMay 13, 2021 at 12:55 AM

    You have given essential data for us. It is excellent and good for everyone. Keep posting always. I am very thankful to you. Locksmith Baltimore MD

    ReplyDelete
  4. bakkenlocksmithJune 25, 2021 at 10:54 PM

    I am glad that I came here and discovered lots of valuable data from your article. It is a beneficial and convenient article for us to increase knowledge. Thanks for sharing an article like this.Residential Rekeying Trenton

    ReplyDelete
  5. Henry LoremNovember 15, 2021 at 2:42 PM

    I can see that you a an expert at ur field! I am launching a website soon, and your information will be very useful for me.. Thanks for all your help and wishing you all the success in your business. Security Services Provider

    ReplyDelete

Post a Comment

If you have any doubts.Please let me know

Popular posts from this blog

Manganese bronze is not typically used as a propeller material .Why

1. High cost: Manganese bronze is a costly alloy, making it less economical for large propellers. 2. Low strength-to-weight ratio: Compared to other propeller materials like nickel-aluminum bronze or stainless steel, manganese bronze has a lower strength-to-weight ratio. 3. Susceptible to corrosion: Manganese bronze can corrode in seawater, especially when exposed to high velocities and turbulence. 4. Poor cavitation resistance: Manganese bronze is more prone to cavitation damage than other materials. 5. Difficult to cast and machine: Manganese bronze is challenging to cast and machine, making it less desirable for complex propeller geometries. 6. Limited weldability: Manganese bronze has poor weldability, making repairs and modifications difficult. Nickel-aluminum bronze or stainless steel are commonly used for propellers due to their: - High strength and durability - Excellent corrosion resistance - Good cavitation resistance - Ease of casting and machining - Weldability
107 comments
Read more

MAN B&W MC Engine VIT Pump

The pump is basically a jerk type with a plunger moving in a matched barrel, using two helical grooves machined in the plunger to control the end of injection by uncovering spill ports and causing the discharge pressure to drop rapidly, thus causing the needle valve in the injector to close. Oil is supplied to the barrel via the spill ports and a suction valve. The suction valve, situated at the top of the barrel opens when the pressure in the  barrel falls below the supply pump pressure; i.e. during downward stroke of plunger, while spill ports are covered by plunger. Replaceable erosion plugs  are fitted in the pump housing opposite the spill ports. The high pressure oil, spilling back, as the edge of the helix uncovers the s...
Post a Comment
Read more

Main engine interlocks

Interlocks are provided so that the engine can be started or reversed only when certain conditions have been fulfilled. When there is a remote control of engines, it is essential to have interlocks. This reduces the possibility of engine damage and any hazards to the operating personnel. Turning gear Interlock . This device prevents the engine from being started if the Turning gear is engaged. Running Direction Interlock . This prevents the fuel from being supplied if the running direction of the engine does not match the Telegraph. Starting Air Distributor in end position . This prevents starting from taking place if the shifting of the Distributor has not been completed. Main Lube. oil pressure, Piston cooling pressure, Jacket water pressure, and important parameters must be above the required minimum. Auxiliary Blower Interlock . The Auxiliary Blower is provided in case of Constant pressure turbo charging. Air Spring pressure Interlock . In case of the present generation...
9 comments
Read more