Skip to main content

How will you repair the coating in FWG & what coating is there on FWG?

  • The internal of the Fresh Water Generator is coated with 2 layers of Nordtec Ceramic 2212 FDA (Food grade coating). 
  • It is developed for Freshwater generators. It is designed as an abrasion resistant and fluid flow ceramic coating. 
  • It coating is reinforced with ceramic and carbide particles to obtain a high level of abrasion and erosion resistance and physical, mechanical strength.
  • The outside of the Fresh Water Generator, is primed and coated with two component paint.
  • As per manual – shell is coated with Neoprene coating and top cover- pure epoxy coating & bottom cover- Neoprene coating

Comments

  1. You have shared such an interesting and informative post. I really like the work which you have done here. Thanks for sharing it. Keep it up. Ice Blasting

    ReplyDelete
  2. It’s great to come across a blog every once in a while that isn’t the same out of date rehashed material. Fantastic read. Best Dent Repair Gastonia NC service provider.

    ReplyDelete
  3. Thank you so much for sharing this blog with us. It provides a collection of useful information. You obviously put a lot of effort into it! Best car air conditioning repair service provider.

    ReplyDelete
  4. Hey what a brilliant post I have come across and believe me I have been searching out for this similar kind of post for past a week and hardly came across this. Thank you very much and will look for more postings from you Best Paintless Dent Repair Wheatland service provider.

    ReplyDelete
  5. Coating treatment assists in the enhancement of the material's performance, even under extreme conditions, as a consequence of the treatment. It is important for this reason. Automated equipment, known as industrial powder coating oven, are used in the process. Liquid paints and powder coatings have their advocates and detractors. Since it swiftly creates many colours without overlapping, the latter is typically a successful hero.

    ReplyDelete
  6. This comment has been removed by the author.

    ReplyDelete
  7. After a long time, I read a very beautiful and very important article that I enjoyed reading. I have found that this article has many important points, I sincerely thank the admin of this website for sharing it. Best Auto Hail Damage Removal Laramie service provider.

    ReplyDelete
  8. I am so grateful for your blog.Really thank you!
    ceramic coating

    ReplyDelete
  9. Awesome article, I am a big fan of this website, keep on posting that great content, and I'll be a regular visitor for a long time...looking for the next one....keep it up! pdr training

    ReplyDelete
  10. Automobile shops with steel buildings are an excellent choice for those looking for a strong, versatile, cost-effective, and environmentally friendly solution for their vehicle storage and repair needs.

    ReplyDelete

Post a Comment

If you have any doubts.Please let me know

Popular posts from this blog

Differences between MC/MC-C and ME/ME-C engines

The electrohydraulic control mechanisms of the ME engine replace the following components of the conventional MC engine: Chain drive for camshaft Camshaft with fuel cams, exhaust cams and indicator cams Fuel pump actuating gear, including roller guides and reversing mechanism Conventional fuel pressure booster and VIT system Exhaust valve actuating gear and roller guides Engine driven starting air distributor Electronic governor with actuator Regulating shaft Engine side control console Mechanical cylinder lubricators. The Engine Control System of the ME engine comprises: Control units Hydraulic power supply unit Hydraulic cylinder units, including: Electronically controlled fuel injection, and Electronically controlled exhaust valve activation Electronically controlled starting air valves Electronically controlled auxiliary blowers Integrated electronic governor functions Tacho system Electronically controlled Alpha lubricators

Why is a man hole door elliptical in shape?

Any opening in a pressure vessel is kept to a minimum and for a man entry an elliptical hole  is lesser in size than the corresponding circular hole. More over it is prime concern to have a  smoothed generous radius at the corners to eliminate stress concentration. Hence other  geometrical shapes like rectangle and square are ruled out.  To compensate for the loss of material in the shell due to opening, a doubler ring has to be  provided around the opening. The thickness of the ring depends on the axis length along the  dirrection in which the stresses are maximum and the thickness of the shell. It is important to  align the minor axis along the length of the vessel, as the stress in this direction is  maximum. Longitudinal stress: Pd/2t where P= pressure inside the vessel, d= diameter of the arc, t=  thickness of the shell plating  Circumferential stress: Pd/4t  More over a considerable material and weight saving is achieved as minor is along the  direction of maximum stress.

Shell Expansion Plan

It is a two dimensional drawing of a three dimensional surface of the ship’s hull form. This plan is very useful for the following information:It is used for marking the location of a hull Damage on this plan by identifying the strake number , letter and frame number so that the exact location of the damage and also suggested repairs are marked in a localised copy. The shell expansion can be used for finding areas of painting surfaces such as topside, boot topping and bottom areas by applying Simpsons rules directly.  In the shell expansion the vertical scale used is different from the horizontal scale and a suitable adjustment has to be made when calculating areas. This becomes useful in solving disputes concerning areas of preparation and painting. It gives information on the thickness of the original strake which is indicated by the number in the circle shown in the strake.  The quality of steel used is also shown by letters A,B,D E and AH, BH,DH, EH.