Skip to main content

Hull roughness measurement

  • Hull Roughness Analyser 
  • Computer is connected to the hand held carriage having a stylus measuring head. 
  • Stylus head is moved around the hull surface to measure and record the hull roughness profile. 
  • One traverse of the head at any point on the hull will collect information from 10 samples having length of 50 mm. 
  • For each 50 mm sample, the micro processor will assess the mean gradient through the peaks and valleys to give highest peak to lowest valley measurement for that sample. 
  • This measurement is known as Rt (50). 
  • Approx. 100 selected locations which must include bow, stern, mid ship, and boot topping area (area between load line and ballast water line). 
  • A number of traverses for stylus will give ‘n’ readings, hence the Mean Hull Roughness (M.H.R) at that station is average of Rt (50) 
  • There will be ‘m’ stations around the hull of the ship. Hence Average Hull Roughness (AHR) will be average of Mean Hull Roughnes

Labels:

Comments

  1. DavidFebruary 1, 2026 at 10:02 PM

    Thrilled to have NewsForth as my go-to news platform for daily updates. The breaking headlines from politics, business world, and technology sectors are always verified and timely. Trustworthy journalism combined with excellent presentation makes this outstanding!

    ReplyDelete
  2. DavidFebruary 1, 2026 at 10:03 PM

    I'm extremely impressed with NewsDeft for its accurate daily news delivery. The breaking updates and verified stories across politics, business, and tech are always insightful. This platform has become my essential source for staying informed about current events!

    ReplyDelete
  3. DavidFebruary 1, 2026 at 10:05 PM

    Absolutely love how professional NewsDixi appears with its clean interface and reliable content. Every headline is accurate and the stories provide meaningful context that helps readers truly understand what's happening worldwide.

    ReplyDelete

Post a Comment

If you have any doubts.Please let me know

Popular posts from this blog

Main engine interlocks

Interlocks are provided so that the engine can be started or reversed only when certain conditions have been fulfilled. When there is a remote control of engines, it is essential to have interlocks. This reduces the possibility of engine damage and any hazards to the operating personnel. Turning gear Interlock . This device prevents the engine from being started if the Turning gear is engaged. Running Direction Interlock . This prevents the fuel from being supplied if the running direction of the engine does not match the Telegraph. Starting Air Distributor in end position . This prevents starting from taking place if the shifting of the Distributor has not been completed. Main Lube. oil pressure, Piston cooling pressure, Jacket water pressure, and important parameters must be above the required minimum. Auxiliary Blower Interlock . The Auxiliary Blower is provided in case of Constant pressure turbo charging. Air Spring pressure Interlock . In case of the present generation...
8 comments
Read more

Differences between MC/MC-C and ME/ME-C engines

The electrohydraulic control mechanisms of the ME engine replace the following components of the conventional MC engine: Chain drive for camshaft Camshaft with fuel cams, exhaust cams and indicator cams Fuel pump actuating gear, including roller guides and reversing mechanism Conventional fuel pressure booster and VIT system Exhaust valve actuating gear and roller guides Engine driven starting air distributor Electronic governor with actuator Regulating shaft Engine side control console Mechanical cylinder lubricators. The Engine Control System of the ME engine comprises: Control units Hydraulic power supply unit Hydraulic cylinder units, including: Electronically controlled fuel injection, and Electronically controlled exhaust valve activation Electronically controlled starting air valves Electronically controlled auxiliary blowers Integrated electronic governor functions Tacho system Electronically controlled Alpha lubricators
15 comments
Read more

Why is a man hole door elliptical in shape?

Any opening in a pressure vessel is kept to a minimum and for a man entry an elliptical hole  is lesser in size than the corresponding circular hole. More over it is prime concern to have a  smoothed generous radius at the corners to eliminate stress concentration. Hence other  geometrical shapes like rectangle and square are ruled out.  To compensate for the loss of material in the shell due to opening, a doubler ring has to be  provided around the opening. The thickness of the ring depends on the axis length along the  dirrection in which the stresses are maximum and the thickness of the shell. It is important to  align the minor axis along the length of the vessel, as the stress in this direction is  maximum. Longitudinal stress: Pd/2t where P= pressure inside the vessel, d= diameter of the arc, t=  thickness of the shell plating  Circumferential stress: Pd/4t  More over a considerable material and weight saving is achieved as...
24 comments
Read more