Skip to main content

Testing of Refer compressor Suction and Discharge valves

 Testing Compressor Discharge Valves

  • Close the liquid valve in the receiver outlet and collect the refrigerant.
  • The compressor will stop on LP trip.
  • Shut the suction and discharge valves quickly.
  • Observe the suction and discharge pressure gauges. If the discharge pressure falls roughly by 1 bar and above in five minutes and simultaneously if suction pressure rises, then the discharge valve is leaking.

Testing of Compressor Suction Valve

  • Run the compressor under manual control.
  • Close the suction valve slowly to prevent foaming of lubricating oil in the crankcase.
  • With the suction valves shut, the compressor should develop a vacuum of 0.4 bar or more.
  • This indicates the suction valves are ‘holding’ and functioning correctly.

Comments

  1. They are packed with ancient elements and Egyptian ornaments, and a few of the the} presents embody bonus video games to discover sphinxes, gods, scarabs, and different winning symbols. forty Line Slots - Also generally known as|often known as} extra strains, these video games are distinguishable with their quite a few advantages. They require greater bets, but the potential winnings after each spin and the accumulating jackpots would make you actually fortunate. The first licensed on line casino opened in 1941 and was referred to as Golden Gate. At the identical time, a previously 카지노 unknown complex emerged, referred to as El Rancho Vegas, which supplied guests horseback driving, a swimming pool, dancers, and, of course, splendid on line casino video games. Slot video games are nowadays obtainable not only for desktop computer systems and laptops but in addition for iPhones, tablets, and smartphones.

    ReplyDelete

Post a Comment

If you have any doubts.Please let me know

Popular posts from this blog

Differences between MC/MC-C and ME/ME-C engines

The electrohydraulic control mechanisms of the ME engine replace the following components of the conventional MC engine: Chain drive for camshaft Camshaft with fuel cams, exhaust cams and indicator cams Fuel pump actuating gear, including roller guides and reversing mechanism Conventional fuel pressure booster and VIT system Exhaust valve actuating gear and roller guides Engine driven starting air distributor Electronic governor with actuator Regulating shaft Engine side control console Mechanical cylinder lubricators. The Engine Control System of the ME engine comprises: Control units Hydraulic power supply unit Hydraulic cylinder units, including: Electronically controlled fuel injection, and Electronically controlled exhaust valve activation Electronically controlled starting air valves Electronically controlled auxiliary blowers Integrated electronic governor functions Tacho system Electronically controlled Alpha lubricators

Why is a man hole door elliptical in shape?

Any opening in a pressure vessel is kept to a minimum and for a man entry an elliptical hole  is lesser in size than the corresponding circular hole. More over it is prime concern to have a  smoothed generous radius at the corners to eliminate stress concentration. Hence other  geometrical shapes like rectangle and square are ruled out.  To compensate for the loss of material in the shell due to opening, a doubler ring has to be  provided around the opening. The thickness of the ring depends on the axis length along the  dirrection in which the stresses are maximum and the thickness of the shell. It is important to  align the minor axis along the length of the vessel, as the stress in this direction is  maximum. Longitudinal stress: Pd/2t where P= pressure inside the vessel, d= diameter of the arc, t=  thickness of the shell plating  Circumferential stress: Pd/4t  More over a considerable material and weight saving is achieved as minor is along the  direction of maximum stress.

Shell Expansion Plan

It is a two dimensional drawing of a three dimensional surface of the ship’s hull form. This plan is very useful for the following information:It is used for marking the location of a hull Damage on this plan by identifying the strake number , letter and frame number so that the exact location of the damage and also suggested repairs are marked in a localised copy. The shell expansion can be used for finding areas of painting surfaces such as topside, boot topping and bottom areas by applying Simpsons rules directly.  In the shell expansion the vertical scale used is different from the horizontal scale and a suitable adjustment has to be made when calculating areas. This becomes useful in solving disputes concerning areas of preparation and painting. It gives information on the thickness of the original strake which is indicated by the number in the circle shown in the strake.  The quality of steel used is also shown by letters A,B,D E and AH, BH,DH, EH.