Skip to main content

Insert plate in welding

  • An insert plate is used to replace any damaged steel plate of ship's hull. The insert plate must have identical characteristics with the original steel plate ( type /grade/thickness etc). The damaged part of the steel plate has to be cropped-out and renewed by welding using the same welding consumables. The minimum consumable grades. All ship's Class Societies consider the above mentioned requirements as permanent repairs for maintaining the ship’s Classification Certificates fully valid.

  • On the contrary, doubler steel plates which are welded on top of a damaged structure plate is considered as temporary repaired with a short limit date until the full permanent repairs are dealt with
Labels:

Comments

  1. aesteironJuly 5, 2024 at 2:37 AM

    I am grateful to this blog site providing special as well as useful understanding concerning this subject.    ISMC Weight Chart

    ReplyDelete
  2. PigigaDecember 20, 2025 at 3:29 AM

    MagazineWrites sets itself apart by highlighting the societal influence of celebrities and public figures, offering readers well-researched, professional, and captivating content that merges culture, activism, and global awareness.

    ReplyDelete
  3. PigigaDecember 20, 2025 at 3:36 AM

    Staying up-to-date is easier as DenmarkMagazine delivers expertly written articles covering lifestyle, culture, and global trends, offering readers insights that are thoughtful, professionally presented, and engaging in every aspect.

    ReplyDelete
  4. PigigaDecember 20, 2025 at 3:44 AM

    For anyone seeking thoughtful perspectives on global affairs, AntMagazine consistently delivers expert coverage of technology, business strategies, and cultural insights, offering readers reliable information with depth, clarity, and engaging commentary.

    ReplyDelete

Post a Comment

If you have any doubts.Please let me know

Popular posts from this blog

Main engine interlocks

Interlocks are provided so that the engine can be started or reversed only when certain conditions have been fulfilled. When there is a remote control of engines, it is essential to have interlocks. This reduces the possibility of engine damage and any hazards to the operating personnel. Turning gear Interlock . This device prevents the engine from being started if the Turning gear is engaged. Running Direction Interlock . This prevents the fuel from being supplied if the running direction of the engine does not match the Telegraph. Starting Air Distributor in end position . This prevents starting from taking place if the shifting of the Distributor has not been completed. Main Lube. oil pressure, Piston cooling pressure, Jacket water pressure, and important parameters must be above the required minimum. Auxiliary Blower Interlock . The Auxiliary Blower is provided in case of Constant pressure turbo charging. Air Spring pressure Interlock . In case of the present generation...
7 comments
Read more

Differences between MC/MC-C and ME/ME-C engines

The electrohydraulic control mechanisms of the ME engine replace the following components of the conventional MC engine: Chain drive for camshaft Camshaft with fuel cams, exhaust cams and indicator cams Fuel pump actuating gear, including roller guides and reversing mechanism Conventional fuel pressure booster and VIT system Exhaust valve actuating gear and roller guides Engine driven starting air distributor Electronic governor with actuator Regulating shaft Engine side control console Mechanical cylinder lubricators. The Engine Control System of the ME engine comprises: Control units Hydraulic power supply unit Hydraulic cylinder units, including: Electronically controlled fuel injection, and Electronically controlled exhaust valve activation Electronically controlled starting air valves Electronically controlled auxiliary blowers Integrated electronic governor functions Tacho system Electronically controlled Alpha lubricators
14 comments
Read more

Shell Expansion Plan

It is a two dimensional drawing of a three dimensional surface of the ship’s hull form. This plan is very useful for the following information:It is used for marking the location of a hull Damage on this plan by identifying the strake number , letter and frame number so that the exact location of the damage and also suggested repairs are marked in a localised copy. The shell expansion can be used for finding areas of painting surfaces such as topside, boot topping and bottom areas by applying Simpsons rules directly.  In the shell expansion the vertical scale used is different from the horizontal scale and a suitable adjustment has to be made when calculating areas. This becomes useful in solving disputes concerning areas of preparation and painting. It gives information on the thickness of the original strake which is indicated by the number in the circle shown in the strake.  The quality of steel used is also shown by letters A,B,D E and AH, BH,DH, EH.
20 comments
Read more