Skip to main content

Engineroom Crane safeties

  • Limit switch for all 6 directions-fwd, aft, port, starboard, lowering and hoisting.
  • Mechanical stoppers in case limit switch fails.
  • Overload trip.
  • Electromagnetic brake. Release by availability of electric power.- Fail safe arrangement
  • Rail guard over the pulley
  • Mechanical locking arrangement for rough weather
  • Locking arrangement and hook for safe carriage of load.
  • Clear marking of Safe working load on crane.
  • Breakers at various places. One in engine room and another in ECR.
  • It shall be operate in 50 list and 20 trim.
Labels:

Comments

  1. loadmateMay 4, 2022 at 1:29 AM

    Such beautifully written. And the information provided is very useful. Thanks for sharing such informative and interesting article. Check this out too overhead crane manufacturers.Thanks!

    ReplyDelete
  2. Safety First Training LtdMarch 31, 2023 at 6:58 AM

    I appreciate you providing this information to us. Give in this manner as you go on. If you are looking for overhead crane training kindly click the link. Thanks a lot.

    ReplyDelete
  3. RADHA CRANESNovember 6, 2025 at 7:25 AM

    This post highlights how essential reliable crane services are for construction efficiency. Safety, precision, and expertise make all the difference in lifting and heavy-duty operations. Great insights!Read more info about cranes in chennai

    ReplyDelete
  4. a1craneacademyNovember 25, 2025 at 8:10 AM

    The precision and focus of a crane operator are unmatched. Their ability to manage heavy loads and complex machinery significantly boosts efficiency on construction sites. Very impressive and highly valuable.Read more info about Forklift Training in California

    ReplyDelete
  5. AnonymousDecember 11, 2025 at 6:24 PM

    Good day sir, would you be able to explain the last point please? Does it mean that it should be working at 50 degree of list? Isn't it too much list for ships?

    ReplyDelete

Post a Comment

If you have any doubts.Please let me know

Popular posts from this blog

Main engine interlocks

Interlocks are provided so that the engine can be started or reversed only when certain conditions have been fulfilled. When there is a remote control of engines, it is essential to have interlocks. This reduces the possibility of engine damage and any hazards to the operating personnel. Turning gear Interlock . This device prevents the engine from being started if the Turning gear is engaged. Running Direction Interlock . This prevents the fuel from being supplied if the running direction of the engine does not match the Telegraph. Starting Air Distributor in end position . This prevents starting from taking place if the shifting of the Distributor has not been completed. Main Lube. oil pressure, Piston cooling pressure, Jacket water pressure, and important parameters must be above the required minimum. Auxiliary Blower Interlock . The Auxiliary Blower is provided in case of Constant pressure turbo charging. Air Spring pressure Interlock . In case of the present generation...
8 comments
Read more

Differences between MC/MC-C and ME/ME-C engines

The electrohydraulic control mechanisms of the ME engine replace the following components of the conventional MC engine: Chain drive for camshaft Camshaft with fuel cams, exhaust cams and indicator cams Fuel pump actuating gear, including roller guides and reversing mechanism Conventional fuel pressure booster and VIT system Exhaust valve actuating gear and roller guides Engine driven starting air distributor Electronic governor with actuator Regulating shaft Engine side control console Mechanical cylinder lubricators. The Engine Control System of the ME engine comprises: Control units Hydraulic power supply unit Hydraulic cylinder units, including: Electronically controlled fuel injection, and Electronically controlled exhaust valve activation Electronically controlled starting air valves Electronically controlled auxiliary blowers Integrated electronic governor functions Tacho system Electronically controlled Alpha lubricators
15 comments
Read more

Manganese bronze is not typically used as a propeller material .Why

1. High cost: Manganese bronze is a costly alloy, making it less economical for large propellers. 2. Low strength-to-weight ratio: Compared to other propeller materials like nickel-aluminum bronze or stainless steel, manganese bronze has a lower strength-to-weight ratio. 3. Susceptible to corrosion: Manganese bronze can corrode in seawater, especially when exposed to high velocities and turbulence. 4. Poor cavitation resistance: Manganese bronze is more prone to cavitation damage than other materials. 5. Difficult to cast and machine: Manganese bronze is challenging to cast and machine, making it less desirable for complex propeller geometries. 6. Limited weldability: Manganese bronze has poor weldability, making repairs and modifications difficult. Nickel-aluminum bronze or stainless steel are commonly used for propellers due to their: - High strength and durability - Excellent corrosion resistance - Good cavitation resistance - Ease of casting and machining - Weldability
88 comments
Read more