Skip to main content

Master’s Review in ISM

 Under the International Safety Management Code, the Master plays a key role in monitoring and improving the Safety Management System (SMS).

What is Master’s Review?

Master’s Review is the periodic review and feedback report submitted by the Master to the company regarding the effectiveness of the SMS onboard.

👉 It is part of continuous improvement required under ISM Code.

Legal Basis in ISM Code

Relevant sections:

  • ISM Code 5 – Master’s Responsibility & Authority

  • ISM Code 12 – Company verification, review & evaluation

The Code requires that:

The Master reviews the SMS and reports deficiencies to the company.

Purpose of Master’s Review

  • Evaluate effectiveness of SMS onboard

  • Identify deficiencies or practical difficulties

  • Suggest improvements

  • Ensure safety & pollution prevention standards are maintained

  • Provide feedback to shore management

What is Included in Master’s Review?

Typically:

  • Safety policy implementation status

  • Results of drills and training

  • Internal audit findings

  • Non-conformities and corrective actions

  • Accident and near-miss reports

  • Crew performance & manning issues

  • PMS effectiveness

  • Suggestions for improvement

Frequency

  • Usually once per year

  • Or as defined in company SMS

  • Often before Management Review Meeting ashore

Importance 

Although it is called Master’s Review, the Chief Engineer contributes significantly, especially regarding:

  • Engine department SMS implementation

  • Maintenance effectiveness

  • Machinery failures

  • Risk assessments

  • Pollution prevention measures


Master’s Review is the periodic evaluation of the ship’s Safety Management System conducted by the Master and reported to the company. It ensures effective implementation of the ISM Code and supports continuous improvement of safety and pollution prevention measures.

Labels:

Comments

Post a Comment

If you have any doubts.Please let me know

Popular posts from this blog

Main engine interlocks

Interlocks are provided so that the engine can be started or reversed only when certain conditions have been fulfilled. When there is a remote control of engines, it is essential to have interlocks. This reduces the possibility of engine damage and any hazards to the operating personnel. Turning gear Interlock . This device prevents the engine from being started if the Turning gear is engaged. Running Direction Interlock . This prevents the fuel from being supplied if the running direction of the engine does not match the Telegraph. Starting Air Distributor in end position . This prevents starting from taking place if the shifting of the Distributor has not been completed. Main Lube. oil pressure, Piston cooling pressure, Jacket water pressure, and important parameters must be above the required minimum. Auxiliary Blower Interlock . The Auxiliary Blower is provided in case of Constant pressure turbo charging. Air Spring pressure Interlock . In case of the present generation...
8 comments
Read more

Differences between MC/MC-C and ME/ME-C engines

The electrohydraulic control mechanisms of the ME engine replace the following components of the conventional MC engine: Chain drive for camshaft Camshaft with fuel cams, exhaust cams and indicator cams Fuel pump actuating gear, including roller guides and reversing mechanism Conventional fuel pressure booster and VIT system Exhaust valve actuating gear and roller guides Engine driven starting air distributor Electronic governor with actuator Regulating shaft Engine side control console Mechanical cylinder lubricators. The Engine Control System of the ME engine comprises: Control units Hydraulic power supply unit Hydraulic cylinder units, including: Electronically controlled fuel injection, and Electronically controlled exhaust valve activation Electronically controlled starting air valves Electronically controlled auxiliary blowers Integrated electronic governor functions Tacho system Electronically controlled Alpha lubricators
15 comments
Read more

Manganese bronze is not typically used as a propeller material .Why

1. High cost: Manganese bronze is a costly alloy, making it less economical for large propellers. 2. Low strength-to-weight ratio: Compared to other propeller materials like nickel-aluminum bronze or stainless steel, manganese bronze has a lower strength-to-weight ratio. 3. Susceptible to corrosion: Manganese bronze can corrode in seawater, especially when exposed to high velocities and turbulence. 4. Poor cavitation resistance: Manganese bronze is more prone to cavitation damage than other materials. 5. Difficult to cast and machine: Manganese bronze is challenging to cast and machine, making it less desirable for complex propeller geometries. 6. Limited weldability: Manganese bronze has poor weldability, making repairs and modifications difficult. Nickel-aluminum bronze or stainless steel are commonly used for propellers due to their: - High strength and durability - Excellent corrosion resistance - Good cavitation resistance - Ease of casting and machining - Weldability
88 comments
Read more