Skip to main content

ME-B and ME-C engines


ME-B

The ME-B design is based on  mechanical MC-C range  with electronic controls that provide improved operational economy and flexibility, and manoeuvrability.
ME-B programme now comprises a total output range from 3,200 kW to 19,040 kW.

  • Electronic fuel injection control
  • Fuel economy
  • High power reliability
  • Longer time between overhauls
  • Low propeller speed
  • Better vessel manoeuvrability
  • Very low life-cycle costs
  • Tier II emissions compliance.
ME-B engines can also be retrofitted to dual-fuel operation so they can run on natural gas. These engines have the same fuel consumption as similar diesel engines, and the same tuning methods can be applied.

ME- C

ME-C engines are a more compact form of  ME-B .
The ME-C advantages
  • Fully integrated electronic control
  • Low SFOC
  • Superior performance parameters
  • Appropriate fuel injection pressure and rate shaping at any load
  • Improved emission characteristics
  • Smokeless operation at any load
  • Lower NOx on command. 
These advantages are gained by the use of variable, electronically-controlled timing of fuel injection and exhaust valves during operation.
Labels:

Comments

  1. Clauss MarineMarch 30, 2022 at 11:57 AM

    You are providing good knowledge. It is really helpful and factual information for us and everyone to increase knowledge.about mercruiser alpha one. Continue sharing your data. Thank you.

    ReplyDelete
  2. Airboat Tours Fort LauderdaleMay 30, 2022 at 1:01 PM

    check this kind of article and I found your article which is related to my interest.alligator tours fort Lauderdale Genuinely it is good and instructive information. Thankful to you for sharing an article like this.

    ReplyDelete
  3. luluAugust 13, 2022 at 12:04 AM

    can ME-C engines also be retrofitted to dual-fuel operation

    ReplyDelete
    Replies
    1. AnonymousJanuary 11, 2023 at 8:22 PM

      Yes. It can be done.

      Delete
    2. AnonymousJanuary 31, 2023 at 11:02 PM

      https://www.man-es.com/company/press-releases/press-details/2022/06/24/bw-lpg-carriers-complete-dual-fuel-retrofits

      Delete
  4. AnonymousAugust 27, 2023 at 11:43 PM

    Can u explain the commercial advantage of ME engines over MC engines

    ReplyDelete

Post a Comment

If you have any doubts.Please let me know

Popular posts from this blog

Manganese bronze is not typically used as a propeller material .Why

1. High cost: Manganese bronze is a costly alloy, making it less economical for large propellers. 2. Low strength-to-weight ratio: Compared to other propeller materials like nickel-aluminum bronze or stainless steel, manganese bronze has a lower strength-to-weight ratio. 3. Susceptible to corrosion: Manganese bronze can corrode in seawater, especially when exposed to high velocities and turbulence. 4. Poor cavitation resistance: Manganese bronze is more prone to cavitation damage than other materials. 5. Difficult to cast and machine: Manganese bronze is challenging to cast and machine, making it less desirable for complex propeller geometries. 6. Limited weldability: Manganese bronze has poor weldability, making repairs and modifications difficult. Nickel-aluminum bronze or stainless steel are commonly used for propellers due to their: - High strength and durability - Excellent corrosion resistance - Good cavitation resistance - Ease of casting and machining - Weldability
107 comments
Read more

MAN B&W MC Engine VIT Pump

The pump is basically a jerk type with a plunger moving in a matched barrel, using two helical grooves machined in the plunger to control the end of injection by uncovering spill ports and causing the discharge pressure to drop rapidly, thus causing the needle valve in the injector to close. Oil is supplied to the barrel via the spill ports and a suction valve. The suction valve, situated at the top of the barrel opens when the pressure in the  barrel falls below the supply pump pressure; i.e. during downward stroke of plunger, while spill ports are covered by plunger. Replaceable erosion plugs  are fitted in the pump housing opposite the spill ports. The high pressure oil, spilling back, as the edge of the helix uncovers the s...
Post a Comment
Read more

Main engine interlocks

Interlocks are provided so that the engine can be started or reversed only when certain conditions have been fulfilled. When there is a remote control of engines, it is essential to have interlocks. This reduces the possibility of engine damage and any hazards to the operating personnel. Turning gear Interlock . This device prevents the engine from being started if the Turning gear is engaged. Running Direction Interlock . This prevents the fuel from being supplied if the running direction of the engine does not match the Telegraph. Starting Air Distributor in end position . This prevents starting from taking place if the shifting of the Distributor has not been completed. Main Lube. oil pressure, Piston cooling pressure, Jacket water pressure, and important parameters must be above the required minimum. Auxiliary Blower Interlock . The Auxiliary Blower is provided in case of Constant pressure turbo charging. Air Spring pressure Interlock . In case of the present generation...
9 comments
Read more