Skip to main content

CO2 bottle level measurement

  • Check temp of the room
  • Put sensor on the bottle and keep moving it up and down until it indicates 100 on the panel by using ultrasonic level sensor.
  • Measure the height
  • Put values in the calculation sheet and final values
Labels:

Comments

  1. Mira BrandsJuly 13, 2021 at 2:25 AM

    Hey what a brilliant post I have come across and believe me I have been searching out for this similar kind of post for past a week and hardly came across this. Thank you very much and will look for more postings from you. Best best insulated water bottle service provider.

    ReplyDelete
    Replies
    1. AnonymousDecember 5, 2023 at 7:17 PM

      We manufacture CO2 cylinders level indicator-portable ultrasonic liquid level indicator. If any interest, please feel free to contact me: WhatsApp/Wechat: +86-18629571677.

      Delete
  2. coldestJuly 14, 2022 at 2:43 AM

    I generally want quality and I found that in your post. The blog you have shared about Water Bottles is beneficial and significant for us. Keep sharing these kinds of blogs here. Thank you.

    ReplyDelete
  3. coldestAugust 2, 2022 at 11:37 PM

    Extremely useful information which you have shared here about Best Water Bottles This is a great way to enhance knowledge for us, and also beneficial for us. Thank you for sharing an article like this.

    ReplyDelete
  4. AnonymousDecember 5, 2023 at 7:18 PM

    We manufacture CO2 cylinders level indicator-portable ultrasonic liquid level indicator. If any interest, please feel free to contact me: WhatsApp/Wechat: +86-18629571677.

    ReplyDelete

Post a Comment

If you have any doubts.Please let me know

Popular posts from this blog

Main engine interlocks

Interlocks are provided so that the engine can be started or reversed only when certain conditions have been fulfilled. When there is a remote control of engines, it is essential to have interlocks. This reduces the possibility of engine damage and any hazards to the operating personnel. Turning gear Interlock . This device prevents the engine from being started if the Turning gear is engaged. Running Direction Interlock . This prevents the fuel from being supplied if the running direction of the engine does not match the Telegraph. Starting Air Distributor in end position . This prevents starting from taking place if the shifting of the Distributor has not been completed. Main Lube. oil pressure, Piston cooling pressure, Jacket water pressure, and important parameters must be above the required minimum. Auxiliary Blower Interlock . The Auxiliary Blower is provided in case of Constant pressure turbo charging. Air Spring pressure Interlock . In case of the present generation...
8 comments
Read more

Differences between MC/MC-C and ME/ME-C engines

The electrohydraulic control mechanisms of the ME engine replace the following components of the conventional MC engine: Chain drive for camshaft Camshaft with fuel cams, exhaust cams and indicator cams Fuel pump actuating gear, including roller guides and reversing mechanism Conventional fuel pressure booster and VIT system Exhaust valve actuating gear and roller guides Engine driven starting air distributor Electronic governor with actuator Regulating shaft Engine side control console Mechanical cylinder lubricators. The Engine Control System of the ME engine comprises: Control units Hydraulic power supply unit Hydraulic cylinder units, including: Electronically controlled fuel injection, and Electronically controlled exhaust valve activation Electronically controlled starting air valves Electronically controlled auxiliary blowers Integrated electronic governor functions Tacho system Electronically controlled Alpha lubricators
15 comments
Read more

Manganese bronze is not typically used as a propeller material .Why

1. High cost: Manganese bronze is a costly alloy, making it less economical for large propellers. 2. Low strength-to-weight ratio: Compared to other propeller materials like nickel-aluminum bronze or stainless steel, manganese bronze has a lower strength-to-weight ratio. 3. Susceptible to corrosion: Manganese bronze can corrode in seawater, especially when exposed to high velocities and turbulence. 4. Poor cavitation resistance: Manganese bronze is more prone to cavitation damage than other materials. 5. Difficult to cast and machine: Manganese bronze is challenging to cast and machine, making it less desirable for complex propeller geometries. 6. Limited weldability: Manganese bronze has poor weldability, making repairs and modifications difficult. Nickel-aluminum bronze or stainless steel are commonly used for propellers due to their: - High strength and durability - Excellent corrosion resistance - Good cavitation resistance - Ease of casting and machining - Weldability
88 comments
Read more