Skip to main content

Hull roughness measurement

  • Hull Roughness Analyser 
  • Computer is connected to the hand held carriage having a stylus measuring head. 
  • Stylus head is moved around the hull surface to measure and record the hull roughness profile. 
  • One traverse of the head at any point on the hull will collect information from 10 samples having length of 50 mm. 
  • For each 50 mm sample, the micro processor will assess the mean gradient through the peaks and valleys to give highest peak to lowest valley measurement for that sample. 
  • This measurement is known as Rt (50). 
  • Approx. 100 selected locations which must include bow, stern, mid ship, and boot topping area (area between load line and ballast water line). 
  • A number of traverses for stylus will give ‘n’ readings, hence the Mean Hull Roughness (M.H.R) at that station is average of Rt (50) 
  • There will be ‘m’ stations around the hull of the ship. Hence Average Hull Roughness (AHR) will be average of Mean Hull Roughnes

Labels:

Comments

  1. DavidFebruary 1, 2026 at 10:02 PM

    Thrilled to have NewsForth as my go-to news platform for daily updates. The breaking headlines from politics, business world, and technology sectors are always verified and timely. Trustworthy journalism combined with excellent presentation makes this outstanding!

    ReplyDelete
  2. DavidFebruary 1, 2026 at 10:03 PM

    I'm extremely impressed with NewsDeft for its accurate daily news delivery. The breaking updates and verified stories across politics, business, and tech are always insightful. This platform has become my essential source for staying informed about current events!

    ReplyDelete
  3. DavidFebruary 1, 2026 at 10:05 PM

    Absolutely love how professional NewsDixi appears with its clean interface and reliable content. Every headline is accurate and the stories provide meaningful context that helps readers truly understand what's happening worldwide.

    ReplyDelete

Post a Comment

If you have any doubts.Please let me know

Popular posts from this blog

Manganese bronze is not typically used as a propeller material .Why

1. High cost: Manganese bronze is a costly alloy, making it less economical for large propellers. 2. Low strength-to-weight ratio: Compared to other propeller materials like nickel-aluminum bronze or stainless steel, manganese bronze has a lower strength-to-weight ratio. 3. Susceptible to corrosion: Manganese bronze can corrode in seawater, especially when exposed to high velocities and turbulence. 4. Poor cavitation resistance: Manganese bronze is more prone to cavitation damage than other materials. 5. Difficult to cast and machine: Manganese bronze is challenging to cast and machine, making it less desirable for complex propeller geometries. 6. Limited weldability: Manganese bronze has poor weldability, making repairs and modifications difficult. Nickel-aluminum bronze or stainless steel are commonly used for propellers due to their: - High strength and durability - Excellent corrosion resistance - Good cavitation resistance - Ease of casting and machining - Weldability
107 comments
Read more

MAN B&W MC Engine VIT Pump

The pump is basically a jerk type with a plunger moving in a matched barrel, using two helical grooves machined in the plunger to control the end of injection by uncovering spill ports and causing the discharge pressure to drop rapidly, thus causing the needle valve in the injector to close. Oil is supplied to the barrel via the spill ports and a suction valve. The suction valve, situated at the top of the barrel opens when the pressure in the  barrel falls below the supply pump pressure; i.e. during downward stroke of plunger, while spill ports are covered by plunger. Replaceable erosion plugs  are fitted in the pump housing opposite the spill ports. The high pressure oil, spilling back, as the edge of the helix uncovers the s...
Post a Comment
Read more

Main engine interlocks

Interlocks are provided so that the engine can be started or reversed only when certain conditions have been fulfilled. When there is a remote control of engines, it is essential to have interlocks. This reduces the possibility of engine damage and any hazards to the operating personnel. Turning gear Interlock . This device prevents the engine from being started if the Turning gear is engaged. Running Direction Interlock . This prevents the fuel from being supplied if the running direction of the engine does not match the Telegraph. Starting Air Distributor in end position . This prevents starting from taking place if the shifting of the Distributor has not been completed. Main Lube. oil pressure, Piston cooling pressure, Jacket water pressure, and important parameters must be above the required minimum. Auxiliary Blower Interlock . The Auxiliary Blower is provided in case of Constant pressure turbo charging. Air Spring pressure Interlock . In case of the present generation...
9 comments
Read more